The ELEGOO Wash and Cure Station 3.0 is an essential companion for resin 3D printing enthusiasts, offering a streamlined post-processing solution with a 7.5L cleaning capacity and 360° curing for flawless results. Designed for compatibility with ELEGOO resin printers like the Saturn 4, it features a powerful Mercury Plus V3.0 system with an upgraded POM bearing for efficient cleaning and a 360° rotating turntable with 24 405nm UV lights for rapid, even curing. The intuitive touch panel allows customizable wash and cure durations up to 30 minutes, while the anti-UV cover blocks 99.9% of UV rays for safety. With a micro switch to pause curing when the cover is lifted and two cleaning modes (basket or build plate), this station ensures thorough cleaning and curing, making it perfect for both beginners and professionals looking to enhance their resin printing workflow.

Specifications

• Cleaning Capacity: 7.5L (114% larger than V2.0)
• Maximum Wash Volume: 230 x 135 x 260 mm (basket cleaning mode)
• Curing Size: Expanded by 460% compared to V2.0 (exact dimensions not specified, typically up to 230 x 260 mm based on similar models)
• Curing System: 360° rotating turntable with 24 405nm UV lights, lamp columns, and reflective mirrors for top-to-bottom curing
• Cleaning Mechanism: Upgraded POM bearing for smoother rotation and enhanced water agitation
• Cleaning Modes:
  • Basket Cleaning Mode: Remove model from build plate, clean in basket (max volume 230 x 135 x 260 mm)
  • Build Plate Cleaning Mode: Clean with build plate attached (height varies by model, e.g., Saturn 4 requires plate removal)
• Operation: Intuitive touch panel for setting wash and cure durations (max 30 minutes)
• Safety Features:
  • Anti-UV cover blocks 99.9% of ultraviolet rays
  • Micro switch pauses curing when cover is removed
• Compatibility: Designed for ELEGOO resin 3D printers (e.g., Saturn 4, Jupiter series with build plate removed); compatible with most LCD/DLP/SLA 3D printers
• Curing Time Recommendation:
  • Models <30 mm diameter: 2 minutes
  • Complex structures: Increase curing time as needed
• Dimensions: Not explicitly stated (typically around 300 x 300 x 400 mm for similar stations)
• Weight: Not explicitly stated (typically around 5–7 kg for similar stations)
• Power: Not specified (typically 50–100W for wash and cure stations, 100-240V, 50/60Hz)
• Additional Features:
  • High-speed cleaning with enhanced water agitation
  • Reflective mirrors under turntable for effective light refraction
  • Compatible with a wide range of resin 3D printers beyond ELEGOO models