The Original Prusa XL Semi-Assembled Single-Toolhead 3D Printer is a large-format CoreXY printer designed for creators needing precision and versatility, featuring a 360 x 360 x 360 mm build volume for massive prints. Equipped with the innovative Nextruder, it offers automatic first-layer calibration via a load cell sensor, eliminating manual adjustments for a perfect print every time. The printer supports multi-material printing with an upgradable tool changer system (up to 5 toolheads), enabling zero-waste printing by combining materials like PLA, PETG, and Flex without wipe towers. Its segmented heatbed ensures energy efficiency, while features like Input Shaper and Pressure Advance enhance speed and quality. With Wi-Fi connectivity, Prusa Connect integration, and open-source code, the Prusa XL provides a seamless, upgradeable experience for both beginners and professionals. Specifications Build Volume: 360 x 360 x 360 mm (14.17 x 14.17 x 14.17 inches) Printing Speed: Up to 200 mm/s (based on typical Prusa performance with Input Shaper) Layer Height: 0.05–0.4 mm Extruder: Nextruder with planetary gearbox, hot-swappable nozzles, and load cell sensor Nozzle Temperature: Up to 300°C Heatbed Temperature: Up to 100°C Heatbed Design: Segmented heatbed with 16 individually controlled tiles for energy efficiency Leveling: Fully automatic first-layer calibration via load cell sensor (no manual Z adjustments) Tool Changer: Single-toolhead (upgradable to 2 or 5 toolheads for multi-material printing) Supported Filaments: PLA, PETG, ABS, ASA, PC, PP, flexible materials (e.g., TPU), carbon-filled filaments (e.g., PCCF) Connectivity: Wi-Fi, Ethernet, USB drive (supports Prusa Connect for remote management) Slicing Software: PrusaSlicer (with multi-material support and waste-saving features) Display: Color touchscreen (size not specified, typically 3.2-inch for Prusa models) Firmware Features: Input Shaper and Pressure Advance for reduced vibrations and optimized filament flow Frame: Sturdy aluminum extrusion frame with linear rails for stability Dimensions: Approximately 600 x 600 x 600 mm (estimated based on build volume and similar models) Weight: Approximately 16 kg (based on similar Prusa models) Power: 240W, 100-240V, 50/60Hz Additional Features: Zero-waste multi-material printing with properly dried filaments Power-loss recovery for uninterrupted printing Optional enclosure for advanced materials like ABS and ASA (stabilizes environment, reduces odors) Designed and built in the EU with open-source code Pre-assembled with minimal setup (toolhead installation and calibration required)